Mission Engineering Volume Pedal with Mute and Tuner Out, Metal VM-1-MT
Price$149
Free Shipping
from Manchester, NH
Listed:over a month ago
Views:707
Watchers:11
Manchester, NH, United States
About This Listing
The Mission VM-1 will not suck your tone. Point to point hand wired, with tuner out and mute switch
The Mission VM-1 is a passive volume pedal designed primarily for use with passive electric guitar pickups. The potentiometer is sealed requiring zero maintenance, and is rated at greater than one million operations. The pedal is completely passive, needing no battery or external power supply to operate.
A loss of high frequency, sometimes referred to as tone suck, is often caused by the signal being split between the main and a separate tuner output. The resistance and capacitance applied to the signal chain as a result of the additional cables and components, causes a low pass filter effect which results in a loss of high frequency. The VM-1 resolves this problem by isolating the tuner out via a mute switch.
Mute mode is engaged by pressing down on the front of the pedal. This enables the tuner and isolates the primary output for completely silent tuning, and noise free guitar changes.
The VM-1 tuner out is only active in mute mode. If you need a volume pedal with the tuner out on all the time, we recommend the Mission VM-PRO active volume pedal.
Pedal dimensions are 10″ x 4″ x 3″
Weight is 3.2lb
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories |
About the Seller
Joined Reverb:2013
Items Sold:53,717
Product Overview
The Mission Engineering VM-1 Volume Pedal takes a pedalboard staple and infuses it with high-end boutique construction and features like hand-wired input and outputs connected through the potentiometer, an isolated tuner out employing a mute switch, and hard-as-nails cold-rolled steel chassis. Operating at a 500K impedance ideal for passive guitars, the beauty in the VM-1 is the absence of "tone suck" usually found in passive volume pedals, which makes it an ideal candidate for any genre in need of total guitar volume control.
Shop 6 options from $100
Product Reviews
About This Listing
The Mission VM-1 will not suck your tone. Point to point hand wired, with tuner out and mute switch
The Mission VM-1 is a passive volume pedal designed primarily for use with passive electric guitar pickups. The potentiometer is sealed requiring zero maintenance, and is rated at greater than one million operations. The pedal is completely passive, needing no battery or external power supply to operate.
A loss of high frequency, sometimes referred to as tone suck, is often caused by the signal being split between the main and a separate tuner output. The resistance and capacitance applied to the signal chain as a result of the additional cables and components, causes a low pass filter effect which results in a loss of high frequency. The VM-1 resolves this problem by isolating the tuner out via a mute switch.
Mute mode is engaged by pressing down on the front of the pedal. This enables the tuner and isolates the primary output for completely silent tuning, and noise free guitar changes.
The VM-1 tuner out is only active in mute mode. If you need a volume pedal with the tuner out on all the time, we recommend the Mission VM-PRO active volume pedal.
Pedal dimensions are 10″ x 4″ x 3″
Weight is 3.2lb
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories |
About the Seller
Joined Reverb:2013
Items Sold:53,717
Product Overview
The Mission Engineering VM-1 Volume Pedal takes a pedalboard staple and infuses it with high-end boutique construction and features like hand-wired input and outputs connected through the potentiometer, an isolated tuner out employing a mute switch, and hard-as-nails cold-rolled steel chassis. Operating at a 500K impedance ideal for passive guitars, the beauty in the VM-1 is the absence of "tone suck" usually found in passive volume pedals, which makes it an ideal candidate for any genre in need of total guitar volume control.
Shop 6 options from $100
Product Reviews